JUKI LK-1900B series - 5 Memory Switches; Memory Switch Start and Change

– 74 –
5. Memory switches
(1) Memory switch start and change
1. To display the mode screen (service level 2)
When MODE key
❹
is continuously pressed
for 6 seconds, "15 memory switch 2" is displayed on
the mode screen.
2. Selecting the item
Press ITEM SELECT key
❻
, and select "15
memory switch 2". Then press EDIT key
❽
.
3. To change the data
In the memory switch data, There are data items to
change the value and to select the pictograph.
Data item to change the value is given a number
such as "K021". It is possible to change the setting
value with DATA CHANGE key
❼
.
Data item to select the pictograph is given a number
such as "K0xx". It is possible to select the pictograph
with DATA CHANGE key
❼
.
❻
❽
❹
❼
(Remarks) The description only uses the panel
diagram of the standard specication.