JUKI LK-1900B series - Page 95

– 81 –
No. Function Setting range Initial value Remarks
K099 Y moving amount of material feed of shorter thread re-
maining thread trimmer
Y moving amount from the last stitch before shorter thread
remaining thread trimmer
Set up in "+" direction if you want to shorten the length of
thread remaining on the wrong side of material.
Set up in "-" direction if you want to lengthen it.
-3.0 to 3.0 LK-1900BB : 0.6
LK-1903BB : 0.9
Only LK-1900BB and 1903
BB are displayed.
K100 X moving amount of material feed of shorter thread re-
maining thread trimmer
X moving amount from the last stitch before shorter thread
remaining thread trimmer
Set up in "+" direction if you want to shorten the length of
thread remaining on the wrong side of material.
Set up in "-" direction if you want to lengthen it.
* Only LK-1900BB and 1903 BB are displayed.
-3.0 to 3.0 LK-1900BB : 0.6
LK-1903BB : 0.8
K101 Number of pulses for work clamp foot wiper drive at the
time of inversion of a thread trimming motor
Wiper operation adjustment at the time of thread trimming
while sewing a pattern
Value of increase and decrease is set for the value of
"K066 Number of pulses for work clamp foot interlock
wiper operation".
* This function can be set up even for a standard machine.
-20 to 20 7
K102 LK-1903BB standard pattern limitation
Select whether to use the patterns of two holes length-
wise, three holes, and four holes lengthwise two lines.
: Use permitted
: Use prohibited
- When you select a pattern
that is not allowed to use,
remove the cloth presser
bar and sew a cloth.
Only LK-1900BB and 1903
BB are displayed.
Only LK-1900BB and 1903
BB are displayed.
K103 Direct pattern type, No.
Edit is prohibited/permitted:
: Prohibited
: Permitted
- Prohibited
K150 The head falling detector switch can be disabled.
: Normal
: Head falling detector switch disabled
-
K241 Model classication
0 : LK1900BSS
1 : LK1900BHS
2 : LK1900BFS
3 : LK1900BMS
4 : LK1901BSS
5 : LK1902BSS
6 : LK1902BHS
7 : LK1903BSS-301
8 : LK1903BSS-302
9 : LK1903BSS-311/BR35
10 : LK1903BSS-312/BR35
11 : LK1900BWS
12 : LK-1900BBS
13 : LK-1900BBF
14 : LK-1903BBS301
15 : LK-1903BBS302
0 to 15 Setting values are spec-
ied at left according to
models.