WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable
connected to a transceiver emit laser light that can damage your eyes.
8. Verify that the status LEDs on the front panel indicate that the transceiver is functioning
correctly. For more information about the component LEDs, see the “LEDs on ACX1000
and ACX1100 Routers” on page 35.
See Also • Front Panel of an ACX1000 Router on page 30
• Uplink Ports on ACX1000 and ACX1100 Routers on page 32
• Removing an ACX1000 or ACX1100 Transceiver on page 117
Copyright © 2017, Juniper Networks, Inc.120
ACX1000 and ACX1100 Universal Access Router Hardware Guide
To Next Page
Loading...
