deverá evitar a exposição à radiação e não deverá olhar fixamente para
orifÃcios que se encontrarem a descoberto.
¡Atención! Debido a que la apertura del puertopuede emitir radiación invisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
Related
Documentation
General Safety Guidelines and Warnings on page 139•
• Laser and LED Safety Guidelines and Warnings on page 158
• Laser and LED Safety Guidelines and Warnings for the ACX5000 Router
• Installation Instructions Warning on page 147
• Grounded Equipment Warning on page 154
Laser and LED Safety Guidelines and Warnings
Juniper Networks devices are equipped with laser transmitters, which are considered a
Class 1 Laser Product by the U.S. Food and Drug Administration and are evaluated as a
Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
•
General Laser Safety Guidelines on page 158
•
Class 1 Laser Product Warning on page 159
•
Class 1 LED Product Warning on page 159
•
Laser Beam Warning on page 159
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Copyright © 2017, Juniper Networks, Inc.158
ACX1000 and ACX1100 Universal Access Router Hardware Guide
To Next Page
Loading...
Need help?
General
