em circuito fechado e planas com terminais de orelha voltados para cima.
Estas terminações de cabo deverão ser do tamanho apropriado para os
respectivos cabos, e deverão prender simultaneamente o isolamento e o fio
condutor.
¡Atención! Cuando se necesite hilo trenzado, utilizar terminales para cables
homologados, tales como las de tipo "bucle cerrado" o "espada", con las
lengüetas de conexión vueltas hacia arriba. Estos terminales deberán ser del
tamaño apropiado para los cables que se utilicen, y tendránque sujetar tanto
el aislante como el conductor.
Varning! När flertrådiga ledningar krävs måste godkända ledningskontakter
användas, t.ex. kabelsko av sluten eller öppen typ med uppåtvänd tapp.
Storleken på dessa kontakter måste vara avpassad till ledningarna och måste
kunna hålla både isoleringen och ledaren fastklämda.
Related
Documentation
General Safety Guidelines and Warnings on page 139•
• General Electrical Safety Guidelines and Warnings on page 167
• DC Power Electrical Safety Guidelines for Switches
• DC Power Disconnection Warning on page 174
• DC Power Grounding Requirements and Warning on page 175
• DC Power Wiring Sequence Warning on page 176
Midplane Energy Hazard Warning
WARNING: High levels of electrical energy are distributed across the midplane.
Be careful not to contact the midplane connectors, or any component
connected to the midplane, with any metallic object while servicing
components.
Multiple Power Supplies Disconnection Warning
WARNING: For a device that has more than one power supply connection,
you must ensure that all power connections are fully disconnected so that
power to the device is completely removed.
Related
Documentation
General Safety Guidelines and Warnings on page 139•
• General Electrical Safety Guidelines and Warnings on page 167
• AC Power Electrical Safety Guidelines
179Copyright © 2017, Juniper Networks, Inc.
Chapter 32: Electrical Safety Guidelines and Warnings
To Next Page
Loading...
Need help?
General
