To Next Page

To Previous Page

Table 23 on page 62 provides specifications on the AC power cord provided for each

country or region.

Table 23: AC Power Cord Specifications

Design StandardPlug TypeElectrical SpecificationModel NumberCountry

AS/NZZS 3112-2000SAA/3250 VAC, 10 A, 50 HzCBL-GP-C15-AUAustralia

GB2099, GB1002PRC/3250 VAC, 10 A, 50 HzCBL-GP-C15-CHChina

CEE (7) VIIVIIG250 VAC, 10 A, 50 HzCBL-GP-C15-EUEurope (except Italy,

Switzerland, and

United Kingdom)

CEI 23–16I/3G250 VAC, 10 A, 50 HzCBL-GP-C15-ITItaly

JIS 8303498GJ125 VAC, 15 A, 50 Hz or 60 HzCBL-GP-C15-JPJapan

CEE (7) VIIVIIG250 VAC, 10 A, 50 HzCBL-GP-C15-KRKorea

SEV 1011 / 6534-212G250 VAC, 10 A, 50 HzCBL-GP-C15-SZSwitzerland

NEMA 5-15498G125 VAC, 13 A, 60 HzCBL-GP-C15-USNorth America

BS 1363/ABS89/13250 VAC, 10 A, 50 HzCBL-GP-C15-UKUnited Kingdom

WARNING: The AC power cord for the router is intended for use with the

router only and not for any other use.

WARNING: The attached power cable is only for this product. Do not use the

cable for another product. Translation in Japanese follows:

NOTE: In North America, AC power cords must not exceed approximately

14.75 ft (4.5 m) in length, to comply with National Electrical Code (NEC)

Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code

(CEC) Section4-010(3). You canorder ACpowercordsthatare in compliance.

ACX1000 and ACX1100 Universal Access Router Hardware Guide

Juniper ACX1000 Hardware Guide

Other manuals for Juniper ACX1000