NOTE: We recommend that you provide at least 10.5 A @ 24 VDC and use a
facility circuit breakerratedfor 10 A minimum. Doing so enables you to operate
the router in any configuration without upgrading the power infrastructure,
and allows the router to function at full capacity using multiple power
supplies.
Related
Documentation
• ACX1000 and ACX1100 DC Power Electrical Safety Guidelines on page 172
• DC Power Copper Conductors Warning on page 173
• DC Power Disconnection Warning on page 174
• DC Power Grounding Requirements and Warning on page 175
• DC Power Wiring Sequence Warning on page 176
• DC Power Wiring Terminations Warning on page 178
Copyright © 2017, Juniper Networks, Inc.64
ACX1000 and ACX1100 Universal Access Router Hardware Guide
To Next Page
Loading...
