Juniper ACX2000 Hardware Guide

Table 3: CLI Equivalents of Terms Used in Documentation for ACX2000 Routers (continued)
Additional InformationItem in Documentation
Value (as
displayed in
the CLI)
Description (as
displayed in the
CLI)
Hardware
Item (as
displayed
in the CLI)
Interface Naming Conventions
Used in the Junos OS Operational
Commands
The router does not have
actual PIC devices; see
entries for PIC 0 through
PIC 3 for the equivalent
item on the router.
n is a value in
the range of
0–3.
Abbreviated name of
the Physical Interface
Card (PIC)
PIC (n)
“ACX2000 and ACX2100
Universal Metro Router
Overview” on page 17
Built-in network ports on
the front panel of the
router
PIC 016x T1/E1 (RJ-48)
“ACX2000 and ACX2100
Universal Metro Router
Overview” on page 17
Built-in network ports on
the front panel of the
router
PIC 1One of the following:
•
6x 1GE (RJ-45)
•
2x 1GE (POE
RJ-45)
“ACX2000 and ACX2100
Universal Metro Router
Overview” on page 17
Built-in uplink ports on
the front panel of the
router
PIC 22x 1GE (SFP)
“ACX2000 and ACX2100
Universal Metro Router
Overview” on page 17
Built-in uplink ports on
the front panel of the
router
PIC 32x 10GE (SFP+)
“Uplink Ports on ACX2000 and
ACX2100 Routers” on page 50
Optical transceiversn is a value
equivalent to
the number of
the port in
which the
transceiver is
installed.
Abbreviated name of
the transceiver
Xcvr (n)
“ACX2000 and ACX2100 Power
Overview” on page 62
DC power supplyValue of n is
always 0.
Built-in power supplyPower
supply (n)
21

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English