Juniper ACX2000 Hardware Guide

Unpacking and Mounting the ACX2000 and ACX2100
Routers
IN THIS SECTION
Unpacking an ACX2000 or ACX2100 Router | 94
Parts Inventory (Packing List) for an ACX2000 and ACX2100 Router | 95
Installing the ACX2000 or ACX2100 Mounting Brackets | 96
Installing the ACX2000 or ACX2100 Router in the Rack | 97
Unpacking an ACX2000 or ACX2100 Router
The ACX2000 and ACX2100 routers are shipped in a cardboard carton, secured with foam packing material.
The carton also contains an accessory box.
CAUTION: The routers are maximally protected inside the shipping carton. Do not
unpack the routers until you are ready to begin installation.
To unpack the router and prepare for installation, you need the following tools:
•
Blank panels to cover any slots not occupied by a component
To unpack the router:
1. Move the shipping carton to a staging area as close to the installation site as possible, but where you
have enough room to remove the system components.
2. Position the carton so that the arrows are pointing up.
3. Open the top flaps on the shipping carton.
4. Remove the accessory box, and verify the contents in it against the parts inventory on the label attached
to the carton.
5. Pull out the packing material holding the router in place.
94

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English