Juniper ACX2000 Hardware Guide

Protocols and Applications Supported by ACX Series Routers
Table 5 on page 26 contains the first Junos OS Release support for protocols and applications on ACX
Series routers. A dash indicates that the protocol or application is not supported.
NOTE:
•
The [edit logical-systems logical-system-name] hierarchy level is not supported on ACX Series
routers.
•
The ACX Series routers does not support per-family maximum transmission unit (MTU)
configuration. The MTU applied to family inet gets applied to other families as well, even
though it can be configured though CLI and visible in show interface extensive output. The
only way to use higher MTU for a family is to manipulate the MTU, apply at interface or family
inet levels, and let it calculate for each family automatically. MTU values are not limited to
1500 but can range between 256 to 9216.
For more information, see the Knowledge Base (KB) article KB28179 at:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB28179.
Table 5: Protocols and Applications Supported by ACX Series Routers
ACX5448ACX500ACX5096ACX5048ACX4000ACX2200ACX2100ACX2000ACX1100ACX1000
Protocol or
Application
Interface and Encapsulation Types
18.2R112.3X54
–D20
(Indoor)
12.3X54
–D25
(Outdoor)
15.1X54
–D20
15.1X54
–D20
12.3x51
-D10
12.3X54
–D15
12.2R212.212.2R212.2Ethernet interfaces—1G,
10G
18.2R1–15.1X54
–D20
15.1X54
–D20
––––––Ethernet interfaces—40G
––––––12.2R212.2–12.2ATM interfaces (IMA
only)
––––––12.2R212.2–12.2E1 interfaces
––––––12.2R212.2–12.2T1 interfaces
26

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English