Juniper ACX2000 Hardware Guide

ACX2000 and ACX2100 Power Overview
Both ACX2000 and ACX2100 routers are available as DC-powered models. The ACX2100 is also available
as an AC-powered model. The power supply in the router is built along the front panel of the chassis, with
the DC power terminals or AC inlets on the front to connect power to the router.
Table 18 on page 62 lists the power consumed by the routers.
Table 18: Power Consumed by ACX2000 and ACX2100 Routers
ValueDescription
52.8 W @-60V and 0.88A (ACX2100- DC)
62.3 W @264V and 0.236A (ACX2100-AC)
Maximum power consumed by the router
SEE ALSO
ACX2000 and ACX2100 Universal Metro Router Overview | 17
Connecting DC Power Cables to the ACX2000 or ACX2100 Router | 102
ACX2000 and ACX2100 DC Power Electrical Safety Guidelines | 172
ACX2100 AC Power Specifications
Table 19 on page 62 lists the AC power system electrical specifications.
Table 19: AC Power System Electrical Specifications
SpecificationItem
Operating range: 100 to 240 VACAC input voltage
50 to 60 Hz (nominal)AC input line frequency
2 A (100 VAC) or 1 A (240 VAC)AC system current rating
62

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English