Juniper ACX2000 Hardware Guide

Table 25: Router Environmental Specifications (continued)
ValueDescription
•
Harsh environment:
•
PoE Power: 65-W each port (max spec)
•
1GB ports: Full traffic
•
10GB ports: Full traffic 1G ports
•
T1/E1 ports: Full traffic
•
SFP/SFP+: Extended temperature grade or industrial grade
•
Central office environment:
•
PoE Power: 30W each port (max spec)
•
1GB ports: Full traffic
•
10GB ports: Full traffic 1G ports
•
T1/E1 ports: Full traffic
•
SFP/SFP+: Extended temperature grade or industrial grade
Configuration
NOTE: Install the router only in restricted areas, such as dedicated equipment rooms and
equipment closets, in accordance with Articles 110-16, 110-17, and 110-18 of the National
Electrical Code, ANSI/NFPA 70.
ACX2000 and ACX2100 Chassis Grounding Cable and Lug Specifications
IN THIS SECTION
Grounding Points Specifications | 74
Grounding Cable Lug Specifications | 75
Grounding Cable Specifications | 76
Grounding Points Specifications
To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, the
router must be adequately grounded before power is connected. To ground ACX Series routers, you must
74

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English