NOTE: We recommend that you provide at least 10.5 A @ 24 VDC and use a facility circuit
breaker rated for 10 A minimum. Doing so enables you to operate the router in any configuration
without upgrading the power infrastructure, and allows the router to function at full capacity
using multiple power supplies.
SEE ALSO
ACX2000 and ACX2100 DC Power Electrical Safety Guidelines | 172
DC Power Copper Conductors Warning | 173
DC Power Disconnection Warning | 174
DC Power Grounding Requirements and Warning | 176
DC Power Wiring Sequence Warning | 178
DC Power Wiring Terminations Warning | 181
66
To Next Page
Loading...
Need help?
General
