Table 6: CLI Equivalents of Terms Used in Documentation for ACX5400 Routers (continued)
Additional Information
Item in
Documentation
Value (as
Displayed in the
CLI)
Description (as
Displayed in the
CLI)
Hardware
Item (as
Displayed
in the CLI)
“AC Power Supply for
ACX5400 Routers” on
page 53
“DC Power Supply for
ACX5400 Routers” on
page 57
AC power supply
module
DC power supply
module
n is a value in the
range of 0—1.
Power supplyPEM n
“Cooling System and
Airflow in ACX5448,
ACX5448-D, and
ACX5448-M Routers” on
page 47
Fann is a value in the
range of 0-5.
FanFan tray
ACX5400 System Software Overview
The ACX5400 routers run the Junos operating system (OS), which provides Layer 2 and Layer 3 switching,
routing, and security services. Junos OS is installed on an ACX5400 router’s 100-gigabyte (GB) internal
solid-state flash drive. The same Junos OS code base that runs on an ACX5400 router also runs on all
Juniper Networks QFX and EX Series switches, SRX Series devices, and on MX Series, ACX Series, and
PTX Series routers.
For more information about which features are supported on an ACX5400 router, see Feature Explorer.
You manage the router using the Junos OS command-line interface (CLI), accessible through the console
and out-of-band management ports on the router.
29
To Next Page
Loading...
