Unpacking and Mounting ACX5448, ACX5448-D, and
ACX5448-M
IN THIS SECTION
Unpack an ACX5400 Router | 86
Mount an ACX5400 Router in a Rack or Cabinet | 87
Unpack an ACX5400 Router
The ACX5400 router chassis is a rigid sheet-metal structure that houses the hardware components. We
ship the ACX5400 router in a cardboard carton, secured with foam packing material. The carton also
contains an accessory box and quick start instructions.
CAUTION: ACX5400 routers are maximally protected inside the shipping carton. Do
not unpack the router until you are ready to begin installation.
To unpack an ACX5400 router:
1. Move the shipping carton to a staging area as close to the installation site as possible, but where you
have enough room to remove the system components.
2. Position the carton so that the arrows are pointing up.
3. Open the top flaps on the shipping carton.
4. Remove the accessory box and verify the contents against the inventory included in the box.
Table 39 on page 87 lists the inventory of components that we supply with an ACX5400 router.
5. Pull out the packing material holding the router in place.
6. Verify the chassis components received:
•
Two power supply modules (PSMs)
86
To Next Page
Loading...
