Juniper EX3300 Hardware Guide

Table 47: show interfaces diagnostics optics Output Fields (continued)
Field DescriptionField Name
Displays whether the laser output power low warning is On or
Off.
Laser output power low warning
(Not available for QSFP+ transceivers)
Displays whether the laser temperature high alarm is On or Off.Laser temperature high alarm
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the laser temperature low alarm is On or Off.Laser temperature low alarm
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the laser temperature high warning is On or
Off.
Laser temperature high warning
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the laser temperature low warning is On or
Off.
Laser temperature low warning
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the module temperature high alarm is On or
Off.
Module temperature high alarm
(Not available for QSFP+ transceivers)
Displays whether the module temperature low alarm is On or
Off.
Module temperature low alarm
(Not available for QSFP+ transceivers)
Displays whether the module temperature high warning is On
or Off.
Module temperature high warning
(Not available for QSFP+ transceivers)
Displays whether the module temperature low warning is On
or Off.
Module temperature low warning
(Not available for QSFP+ transceivers)
Displays whether the module voltage high alarm is On or Off.Module voltage high alarm
(Not available for XFP and QSFP+ transceivers)
Displays whether the module voltage low alarm is On or Off.Module voltage low alarm
(Not available for XFP and QSFP+ transceivers)
Displays whether the module voltage high warning is On or Off.Module voltage high warning
(Not available for XFP and QSFP+ transceivers)
Displays whether the module voltage low warning is On or Off.Module voltage low warning
(Not available for XFP and QSFP+ transceivers)
Copyright © 2015, Juniper Networks, Inc.264
Network Interfaces for EX4300 Switches

Juniper EX3300 Specifications

General

Ethernet LAN	Yes
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Ethernet interface type	Gigabit Ethernet
Number of VLANs	4096
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Console port	-
ExpressCard slot	No
Fiber ports quantity	4
USB 2.0 ports quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Throughput	130 Mpps
Number of queues	8
MAC address table	16000 entries
Maximum data transfer rate	176 Gbit/s
Supported data transfer rates	10, 100, 1000Mbps
Switch type	Managed
Switch layer	L2
Security algorithms	SSH-2
Power source	AC
AC input voltage	100 - 240 V
Power consumption (typical)	100 W
Form factor	1U
Product color	Black
Flash memory	1024 MB
Processor frequency	1000 MHz
Compatible operating systems	Junos
Operating altitude	0 - 3049 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Supported network protocols	IPv6

Weight and Dimensions

Depth	310 mm
Width	437 mm
Height	44 mm
Weight	4900 g