EasyManuals Logo

Juniper EX3300 Hardware Guide

Juniper EX3300
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
disable (Interface)
Syntax disable;
Hierarchy Level [edit interfaces interface-name],
[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Description Disable a physical or a logical interface, effectively unconfiguring it.
CAUTION:
Dynamic subscribers and logical interfaces use physical interfaces for
connection to the network. The Junos OS allows you to set the interface
to disable and commit the change while dynamic subscribers and logical
interfaces are still active. This action results in the loss of all subscriber
connections on the interface. Use care when disabling interfaces.
If aggregated SONET links are configured between a T1600 router and a
T4000 router, interface traffic is disrupted when you disable the physical
interface configured on the T1600 router. If you want to remove the
interface, we recommend that you deactivate the interface instead of
disabling it.
NOTE:
When you use the disable statement at the [edit interfaces] hierarchy level,
depending on the PIC type, the interface might or might not turn off the
laser. Older PIC transceivers do not support turning off the laser, but newer
Gigabit Ethernet (GE) PICs with SFP and XFP transceivers do support it
and the laser will be turned off when the interface is disabled.
When you disable or deactivate an interface, then all the references made
to the deactivated interface must be removed from the routing instance.
WARNING: Do not stare into the laser beam or view it directly with optical
instruments even if the interface has been disabled.
Copyright © 2015, Juniper Networks, Inc.168
Network Interfaces for EX4300 Switches

Table of Contents

Other manuals for Juniper EX3300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3300 and is the answer not in the manual?

Juniper EX3300 Specifications

General IconGeneral
Ethernet LANYes
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Ethernet interface typeGigabit Ethernet
Number of VLANs4096
Networking standardsIEEE 802.1ab, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Console port-
ExpressCard slotNo
Fiber ports quantity4
USB 2.0 ports quantity0
Basic switching RJ-45 Ethernet ports quantity48
Throughput130 Mpps
Number of queues8
MAC address table16000 entries
Maximum data transfer rate176 Gbit/s
Supported data transfer rates10, 100, 1000Mbps
Switch typeManaged
Switch layerL2
Security algorithmsSSH-2
Power sourceAC
AC input voltage100 - 240 V
Power consumption (typical)100 W
Form factor1U
Product colorBlack
Flash memory1024 MB
Processor frequency1000 MHz
Compatible operating systemsJunos
Operating altitude0 - 3049 m
Non-operating altitude0 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
Supported network protocolsIPv6
Weight and Dimensions IconWeight and Dimensions
Depth310 mm
Width437 mm
Height44 mm
Weight4900 g

Related product manuals