Juniper EX3300 Hardware Guide

Table 34: Unsupported [edit interfaces ge] Configuration Statements for EX Series
Switches (continued)
HierarchyStatement
[edit interfaces ge unit family inet]sampling
[edit interfaces ge unit family inet]service
[edit interfaces ge unit family inet]simple-filter
[edit interfaces ge unit family inet]targeted-broadcast
[edit interfaces ge unit family inet]unnumbered-address
[edit interfaces ge unit family inet address vrrp-group track interface]bandwidth-threshold
[edit interfaces ge unit family inet6]service
[edit interfaces ge unit family inet6 address vrrp-group track interface]bandwidth-threshold
[edit interfaces ge unit family inet6 filter]group
[edit interfaces ge unit input-vlan-map]pop
[edit interfaces ge unit output-vlan-map]push
Related
Documentation
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108•
[edit interfaces interface-range] Configuration Statement Hierarchy on EX Series
Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces
interface-range] hierarchy level on EX Series switches.
•
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
•
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
•
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, seeEX Series Switch Software
Features Overview
125Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements

Juniper EX3300 Specifications

General

Ethernet LAN	Yes
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Ethernet interface type	Gigabit Ethernet
Number of VLANs	4096
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Console port	-
ExpressCard slot	No
Fiber ports quantity	4
USB 2.0 ports quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Throughput	130 Mpps
Number of queues	8
MAC address table	16000 entries
Maximum data transfer rate	176 Gbit/s
Supported data transfer rates	10, 100, 1000Mbps
Switch type	Managed
Switch layer	L2
Security algorithms	SSH-2
Power source	AC
AC input voltage	100 - 240 V
Power consumption (typical)	100 W
Form factor	1U
Product color	Black
Flash memory	1024 MB
Processor frequency	1000 MHz
Compatible operating systems	Junos
Operating altitude	0 - 3049 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Supported network protocols	IPv6

Weight and Dimensions

Depth	310 mm
Width	437 mm
Height	44 mm
Weight	4900 g