EasyManuals Logo

Juniper EX3300 Hardware Guide

Juniper EX3300
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Aggregated Ethernet links on T Series routers can be configured to operate at one of
the following speeds:
100g—Links are 100 Gbps.
100m—Links are 100 Mbps.
10g—Links are 10 Gbps.
1g—Links are 1 Gbps.
40g—Links are 40 Gbps.
50g—Links are 50 Gbps.
80g—Links are 80 Gbps.
8g—Links are 8 Gbps.
mixed—Links are of various speeds.
oc192—Links are OC192.
Related
Documentation
aggregated-ether-options
Configuring Mixed Aggregated Ethernet Links
Ethernet Interfaces
Configuring Aggregated Ethernet Minimum Links
On aggregated Ethernet interfaces, you can configure the minimum number of links that
must be up for the bundle as a whole to be labeled up. By default, only one link must be
up for the bundle to be labeled up.
To configure the minimum number of links:
1. Specify that you want to configure the aggregated Ethernet options.
user@host# edit interfaces interface-name aggregated-ether-options
2. Configure the minimum number of links.
[edit interfaces interface-name aggregated-ether-options]
user@host# set minimum-links number
On M120, M320, MX Series, T Series, and TX Matrix routers with Ethernet interfaces, and
EX 9200 switches, the valid range for minimum-links number is 1 through 16. When the
maximum value (16) is specified, all configured links of a bundle must be up for the bundle
to be labeled up.
On all other routers and on EX Series switches, other than EX8200 switches, the range
of valid values for minimum-links number is 1 through 8. When the maximum value (8) is
specified, all configured links of a bundle must be up for the bundle to be labeled up.
Copyright © 2015, Juniper Networks, Inc.92
Network Interfaces for EX4300 Switches

Table of Contents

Other manuals for Juniper EX3300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3300 and is the answer not in the manual?

Juniper EX3300 Specifications

General IconGeneral
Ethernet LANYes
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Ethernet interface typeGigabit Ethernet
Number of VLANs4096
Networking standardsIEEE 802.1ab, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Console port-
ExpressCard slotNo
Fiber ports quantity4
USB 2.0 ports quantity0
Basic switching RJ-45 Ethernet ports quantity48
Throughput130 Mpps
Number of queues8
MAC address table16000 entries
Maximum data transfer rate176 Gbit/s
Supported data transfer rates10, 100, 1000Mbps
Switch typeManaged
Switch layerL2
Security algorithmsSSH-2
Power sourceAC
AC input voltage100 - 240 V
Power consumption (typical)100 W
Form factor1U
Product colorBlack
Flash memory1024 MB
Processor frequency1000 MHz
Compatible operating systemsJunos
Operating altitude0 - 3049 m
Non-operating altitude0 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
Supported network protocolsIPv6
Weight and Dimensions IconWeight and Dimensions
Depth310 mm
Width437 mm
Height44 mm
Weight4900 g

Related product manuals