EasyManuals Logo

Juniper EX3300 Hardware Guide

Juniper EX3300
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #255 background imageLoading...
Page #255 background image
Action Enter the following command:
user@switch> show interfaces ae0 terse
Interface Admin Link Proto Local Remote
ae0 up up
ae0.0 up up inet 10.10.10.2/24
Meaning The output confirms that the ae0 link is up and shows the family and IP address assigned
to this link.
Related
Documentation
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring Aggregated Ethernet Interfaces (J-Web Procedure) on page 83
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Verifying That EEE Is Saving Energy on Configured Ports
Purpose Verify that enabling EEE saves energy on Base-T Copper Ethernet ports.
Action You can see the amount of energy saved by EEE on an EX Series switch using the show
chassis power-budget-statistics command.
1. View the power budget of an EX Series switch before enabling EEE.
On an EX6210 switch:
user@switch>show chassis power-budget-statistics
PSU 2 (EX6200-PWR-AC2500) : 2500 W Online
PSU 3 ) : 0 W Offline
Total Power supplied by all Online PSUs : 2500 W
Power Redundancy Configuration : N+1
Power Reserved for the Chassis : 500 W
Fan Tray Statistics Base power Power Used
FTC 0 : 300 W nan W
FPC Statistics Base power Power Used PoE
power Priority
FPC 3 (EX6200-48T) : 150 W 61.54 W
0 W 9
FPC 4 (EX6200-SRE64-4XS) : 100 W 48.25 W
0 W 0
FPC 5 (EX6200-SRE64-4XS) : 100 W 48.00 W
0 W 0
FPC 7 (EX6200-48T) : 150 W 63.11 W
0 W 9
FPC 8 (EX6200-48T) : 150 W 12.17 W
0 W 9
Total (non-PoE) Power allocated : 950 W
Total Power allocated for PoE : 0 W
Power Available (Redundant case) : 0 W
Total Power Available : 1550 W
On an EX4300 switch:
user@switch>show chassis power-budget-statistics fpc 1
235Copyright © 2015, Juniper Networks, Inc.
Chapter 4: Routine Monitoring

Table of Contents

Other manuals for Juniper EX3300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3300 and is the answer not in the manual?

Juniper EX3300 Specifications

General IconGeneral
Ethernet LANYes
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Ethernet interface typeGigabit Ethernet
Number of VLANs4096
Networking standardsIEEE 802.1ab, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Console port-
ExpressCard slotNo
Fiber ports quantity4
USB 2.0 ports quantity0
Basic switching RJ-45 Ethernet ports quantity48
Throughput130 Mpps
Number of queues8
MAC address table16000 entries
Maximum data transfer rate176 Gbit/s
Supported data transfer rates10, 100, 1000Mbps
Switch typeManaged
Switch layerL2
Security algorithmsSSH-2
Power sourceAC
AC input voltage100 - 240 V
Power consumption (typical)100 W
Form factor1U
Product colorBlack
Flash memory1024 MB
Processor frequency1000 MHz
Compatible operating systemsJunos
Operating altitude0 - 3049 m
Non-operating altitude0 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
Supported network protocolsIPv6
Weight and Dimensions IconWeight and Dimensions
Depth310 mm
Width437 mm
Height44 mm
Weight4900 g

Related product manuals