member ge-10/1/1;
member ge-5/5/1;
mtu 256;
hold-time up 10;
ether-options {
flow-control;
speed {
100m;
}
802.3ad primary;
}
}
protocols {
dot1x {
authenticator {
interface range-1 {
retries 1;
}
}
}
}
}
The interface node present under authenticator is expanded into member interfaces of
the interface-range range-1 as follows:
protocols {
dot1x {
authenticator {
interface ge-10/1/1 {
retries 1;
}
interface ge-5/5/1 {
retries 1;
}
}
}
}
The interface range-1 statement is expanded into two interfaces, ge-10/1/1 and ge-5/5/1,
and configuration retries 1 is copied under those two interfaces.
This configuration can be verified using the show protocols dot1x | display inheritance
command.
Configuring Accounting for the Physical Interface
Juniper Networks routers and switches can collect various kinds of data about traffic
passing through the router and switch. You can set up one or more accounting profiles
that specify some common characteristics of this data, including the following:
•
The fields used in the accounting records
•
The number of files that the router or switch retains before discarding, and the number
of bytes per file
Copyright © 2015, Juniper Networks, Inc.74
Network Interfaces for EX4300 Switches
To Next Page
Loading...
Need help?
General
Weight and Dimensions
