Juniper SRX320 - Replacing Mini-Physical Interface Modules; Removing a Mini-Physical Interface Module

CHAPTER 22
Replacing Interface Modules
•
Replacing Mini-Physical Interface Modules in the SRX320 Services Gateway on page 97
Replacing Mini-Physical Interface Modules in the SRX320 Services Gateway
The Mini-PIMs available on the SRX320 Services Gateway are not hot-swappable. You
need to power off the device before removing or installing Mini-PIMs. For information on
replacing Mini-PIMs, see the SRX300 Series and SRX550 High Memory Services Gateway
Interface Modules Reference.
Related
Documentation
• SRX320 Services Gateway Interface Modules Overview on page 11
97Copyright © 2016, Juniper Networks, Inc.