EasyManua.ls Logo

Juniper SRX320 - Preparing the SRX320 Services Gateway for Wall-Mount Installation; Preparing the SRX320 Services Gateway for Desk-Mount Installation

Juniper SRX320
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Related
Documentation
Preparing the SRX320 Services Gateway for Wall-Mount Installation on page 50
Preparing the SRX320 Services Gateway for Desk-Mount Installation on page 50
Installing the SRX320 Services Gateway in a Rack on page 53
Preparing the SRX320 Services Gateway for Wall-Mount Installation
You can mount an SRX320 Services Gateway on a wall. The four rubber feet attached
to the chassis provide stability. Before mounting the SRX320 Services Gateway on a wall:
Verify that the installation site meets the requirements described in “Site Preparation
Checklist for the SRX320 Services Gateway” on page 20.
Remove the services gateway chassis from the shipping carton. For unpacking
instructions, see “Unpacking the SRX320 Services Gateway” on page 45.
Verify that you have the following parts available in your wall-mounting kit:
Wall-mounting brackets
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
Related
Documentation
Preparing the SRX320 Services Gateway for Rack-Mount Installation on page 49
Installing the SRX320 Services Gateway on a Wall on page 57
Preparing the SRX320 Services Gateway for Desk-Mount Installation
You can mount an SRX320 Services Gateway on a desk or any other level surface
horizontally or vertically. The four rubber feet attached to the chassis provide stability.
Before mounting an SRX320 Services Gateway on a desk or other level surface:
Verify that the installation site meets the requirements described in “Site Preparation
Checklist for the SRX320 Services Gateway” on page 20.
Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
Remove the services gateway chassis from the shipping carton. For unpacking
instructions, see “Unpacking the SRX320 Services Gateway” on page 45.
Related
Documentation
Installing the SRX320 Services Gateway on a Desk on page 56
Preparing the SRX320 Services Gateway for Rack-Mount Installation on page 49
Preparing the SRX320 Services Gateway for Wall-Mount Installation on page 50
Copyright © 2016, Juniper Networks, Inc.50
SRX320 Services Gateway Hardware Guide

Table of Contents

Other manuals for Juniper SRX320

Related product manuals