Table 3: SRX320 Services Gateway Front Panel Components (continued)
DescriptionComponentNumber
Six Gigabit Ethernet LAN ports (0/0 to
0/5)
The Gigabit Ethernet ports have the
following characteristics:
•
Use an RJ-45 connector
•
Operate in full-duplex and
half-duplex modes
•
Support flow control
•
Support autonegotiation
The Gigabit Ethernet ports can be used
to:
•
Function as front-end network ports
•
Provide LAN and WAN connectivity
to hubs, switches, local servers, and
workstations
•
Forward incoming data packets to
the services gateway
•
Receive outgoing data packets from
the services gateway
1 G Ethernet ports5
The services gateway has one USB port
that accepts a USB storage device.
USB port7
Indicate component and system status,
and troubleshooting information at a
glance.
LEDs8
Use the Power button toshut down the
services gateway.
Power button9
Figure 2 on page 7 shows the LEDs on the front panel.
Figure 2: SRX320 Services Gateway Front Panel LEDs
Table 4 on page 8 lists the front panel LEDs.
7Copyright © 2016, Juniper Networks, Inc.
Chapter 2: Chassis Description
To Next Page
Loading...
