Juniper SRX320 Hardware Guide

Table 8: Site Preparation Checklist for SRX320 Services Gateway
Installation (continued)
NotesDatePerformed By
Additional
InformationItem or Task
“SRX320
Services
Gateway
Electrical Wiring
Guidelines” on
page 33
“SRX320
Services
Gateway Power
Specifications
and
Requirements”
on page 34
•
Measure the distance
between the external
power sources and
the device installation
site.
•
Locate sites for
connection of system
grounding.
•
Calculate the power
consumption and
requirements.
Rack Requirements
“SRX320
Services
Gateway
Rack-Mounting
Requirements
and Warnings”
on page 25
Verify that your rack
meets the minimum
requirements.
Rack Installation
“Preparing the
SRX320
Services
Gateway for
Rack-Mount
Installation” on
page 49
•
Plan the rack location,
including required
space clearances.
•
Secure the rack to the
floor and building
structure.
Cabinet Requirements
“SRX320
Services
Gateway
Cabinet Size
and Clearance
Requirements”
on page 31
•
Verify that your
cabinet meets the
minimum
requirements.
•
Plan the cabinet
location, including
required space
clearances.
Wall Installation
21Copyright © 2016, Juniper Networks, Inc.
Chapter 6: Planning and Preparing the Site

Juniper SRX320 Specifications

General

Firewall throughput	1000 Mbit/s
Number of users	50 user(s)
Quality of Service (QoS) support	Yes
Mobile VPN IPSec	250
IPS/IDS throughput	100 Mbit/s
USB 2.0 ports quantity	1
Connectivity technology	Wired
SFP module slots quantity	2
Ethernet LAN (RJ-45) ports	6
Internal memory	4000 MB
Flash memory	8000 MB
Storage media type	Flash
Power consumption (typical)	27 W
Heat dissipation	157 BTU/h
Concurrent connections	64000
Mean time between failures (MTBF)	284700 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2

Weight and Dimensions

Weight	1510 g
Dimensions (WxDxH)	299.9 x 43.9 x 191 mm