•
Follow the ESD procedures to avoid damaging equipment. Static discharge can cause
components to fail completely or intermittently over time. For more information, see
“Preventing Electrostatic Discharge Damage to the SRX320 Services Gateway” on
page 115.
•
Ensure that a blank Mini-PIM panel is installed in the empty slot to prevent any
interruption or reduction in the flow of air across internal components.
Related
Documentation
• Site Preparation Checklist for the SRX320 Services Gateway on page 20
23Copyright © 2016, Juniper Networks, Inc.
Chapter 6: Planning and Preparing the Site
To Next Page
Loading...
