7676
Maintenance
Faults
9 Faults
The follow chapter describes possible causes of faults and the
work needed to rectify them.
Should faults occur frequently, shorten the maintenance
intervals in line with the actual loading on the unit.
Contact the manufacturer with any faults that cannot be
rectiedusingthefollowinginformation
Chapter 1.4
„Customer Service“ on page 8.
Behaviour in the event of faults
Thefollowingapplies:
1. Immediately switch off the unit with faults that pose an
immediate danger to persons or property.
2. Determine the cause of the fault.
3. Switch off the unit and prevent if from being reconnected
if rectifying the fault requires work in the hazard area.
Immediately advise a supervisor on site about the fault.
4. Either rectify the fault yourself or have it repaired by
authorised personnel, depending on the nature of the
fault.
The fault table (
Chapter 9.2 „Fault Tables“ on
page 77) provides information on how to rectify
and remedy faults.
To Next Page
Loading...
