4 Imaging programs
4. Press the Save button on the upper right corner of the screen. The image(s) marked
for saving will be sent to the workstation.
● Preview selection
● Save button
The image(s) can be examined using the CLINIVIEW software. See CLINIVIEW user
manual for details.
4.6 User configurable panoramic mA level
Default mA level for panoramic programs can be set using the touch screen display. To
change the setting:
1. Start an exam and select a panoramic program.
2. Adjust the mA to desired value.
3. Select Settings on the touch screen.
4. Select Imaging program defaults.
5. Select Set current PAN mA level as default.
4.7 User Configurable Default Program
Default imaging program (pan/ceph/3D) can be set using the touch screen display. To
change default program:
1. Start an exam and select the desired program.
2. Press the Settings button on the touch screen.
3. Select Imaging program defaults.
4. Select Set current program as default.
4.8 Cephalometric programs
Cephalometric pediatric lateral projection
30 ORTHOPANTOMOGRAPH
™
OP 3D Pro
To Next Page
Loading...
