3 Advanced use
KaVo Scan eXam One 17
3.1.3 Workflow
From the imaging application software you are
using select unit Setup / Workflow page.
3.1.3.1 Readout start
Select Automatic if you want the unit to start
automatically image plate processing.
The Start after options all ow to select when the
unit starts image plate processing:
• After Plate insert: processing starts auto-
matically when it detects right way inserted
imaging plate in the plate carrier.
• After Cover removal: after the imaging plate
and protective cover have been inserted into
the plate carrier, processing starts automat-
ically when the protective cover is removed.
To Next Page
Loading...
Need help?
General
