6 Installation of the imaging plate system
KaVo Scan eXam One 43
6.3 Install the Application software
To function with the scanner, the workstation must
have:
• Client software (CLINIVIEW or DTX Studio
with DTX Studio Core)
•KaVo Drivers
NOTICE! KaVo Drivers are automatically installed
with CLINIVIEW but they must be separately in-
stalled for DTX Studio installation.
The imaging plate system is delivered with an
software required to operate the system. In a
functional system there are two main parts: a
server for storing the patient data and images and
client software for operating the system and the
units. Both parts can be on the same computer but
there must be only one computer acting as
database server in a network. If the imaging plate
system is operated and images are viewed from
multiple workstation in a network install only the
client software on the remaining other workstation.
The workstation that is acting as a server must be
powered at any times the system is used on any of
the workstation.
In addition there can be a license server in the local
area network to manage software licenses for
multiple workstation.
Turn the unit on by pressing the power ON/OFF
button before installing the software.
To Next Page
Loading...
Need help?
General
