4 Accessories
34 KaVo Scan eXam One
4.4 Holders
It is recommended to use imaging plate holders to
ensure accurate patient positioning and
consistently good image quality. Problems caused
by manually positioning the imaging plate include:
• incorrect vertical alignment
• distortion
• cone cut off
• poor projection standardization
• inferior image quality
• contamination risk
Contact your distributor for more information on
imaging with plate holders.
4.5 Occlusal projection imaging with
Occlusal 4C start-up kit and
accessories
The complete image is produced automatically from
two size 3 imaging plates. The plates are shielded
from biting damage with a rigid bite protector. For
more information see instructions provided with the
Occlusal 4C kit and on chapter 3 Advanced use.
4.6 Microfiber cloth
Imaging plate microfiber cloth is used for dry
cleaning of the imaging plates (comparable to
eyeglasses cleaning).
To Next Page
Loading...
Need help?
General
