V7.00
24905_EDEBDA0272-5019-1_EN
15
Installation
Terminal:
41 (K1) to 45 (K5): Non-oating relay contacts
These contacts are used as control outputs for the capacitor
switching contactors. The contacts are open as long as the
device is dead and in stages that are not connected. Maximum
switching capacity 2A at 250V AC.
51 (-) and 52 (+): Temperature sensor input
A temperature sensor, e.g. PT1000, can be connected to this
input to measure the switchgear cabinet temperature.
Temperature measuring range of – 20°C to 100°C +/- 2°C.
90 (ground):
91 (A)
92 (B)
Interface connection
For communication on the eBus or Modbus
To Next Page
Loading...
