KBR multicomp D6 7 Series - Page 34

V7.00
24905_EDEBDA0272-5019-1_EN
34
SPQ  Apparent power / active power / reactive power - total (3-phase)
harm. U Voltage harmonics (distortion factor)
harm. I Current harmonics (distortion current strength)
Lim Limit
AC Attenuation coecient
Module Module management
YES Conrmation to save conguration
NO Discard conguration
SCAN Scan mode (search mode) for module search and eBus address assign-
ment
Mode Switching mode of stages
Firmware Operating system software of basic device or of display module
Setup Device conguration
Message Error messages and error state
Displ. Operating system of display module
1ph single-phase (with induced current measurement)
3ph 3-phase (with induced current measurement)
Basic para Basic parameters (submenus)
S Expansion cabinet 2 to 6
ÈÉÊU Measuring voltage transformer prim./sec.
ÈÉÊI Series transformer prim./sec.
Learn Learning function stage power
Bus Bus parameters
LCD LCD parameters (display module)
Dfact Attenuation coecient (switching interval stages)
Lan. Language of text display (display module)
code Password protection
Reset Reset function extreme values and conguration
Temp Enable temperature measurement
Serv Customer service address
System operation