Keba D3-DA 3 Series - Page 16

D3DA3xx/xSafetynotes
ProjectengineeringmanualV1.00
16
©KEBA
WARNING!
● Itisabsolutelyessentialthatyoualsoobservethesafetyinstructionsin
thesystemmanualandthesafetymanual"Functionalsafety"foryour
automationsystem.
● ThefollowingareasofapplicationareexpresslyexcludedfortheD3DA
3xx/x:
● Useinareaswherethereisariskofexplosionorfire
● Useintheminingsector
● Useinoutdoorareas
● Useinwetroomsorroomswiththeriskofsplashingwater
● Useinenvironmentswithheavilypollutedair
● Useinenvironmentswithharmfulsolutions,steamsorradiations
● Useinnonstationaryapplications
● UsewithadirectlyconnectedDCmotor
● Otherproductsaretobeusedfortheseapplications!
● Themoduleisdefinedas"opentypeequipment"(UL508)oras"open
equipment"(EN611312)andmustthereforebeinstalledinacontrol
cabinet.
● TheD3DA3xx/xcontainssafetyrelevantfunctions(e.g.STO).For
safetyrelevantcontroltasksandpersonnelsecurityacontrolofKEBAin
thevariantD3DU3x5/xwithcorrespondentsafetyrelatedperipheralde
vicesmustbeused.Detailscanbefoundinthesafetymanual"Func
tionalsafety".
● AtthedevelopementoftheD3DA3xx/xthestandardENISO138491
orotherstandardsfordescriptionofthefunctionalsafetywasnotconsid
ered.
Caution
Improperuseoftheassemblyorthecontrolsystemleadstoirreparable
damage!
● Turnoffthepowersupplybeforeinsertingorremovingthemodule.
Otherwise,themodulecanbedestroyedorundefinedsignalstatescan
leadtodamageofthecontrolsystem.
● Iftherearefurtherpowersupplyunitsinthesystem,theymustalsobe
turnedoff,toensurethatnoelectricalvoltagesarepresentattheinputs
(andpossiblytherelayoutputs)ofthesafetycontrol.
Caution
● Correctoperationandsafetyofdamagedcomponentscannotbeguar
anteed.Damagedproductsmustneverbeinstalledorputintooperation.
Defectiveproductsmustbereplacedimmediately.