Keba D3-DA 3 Series - Introduction; 1.1 Purpose of the document; 1.2 Preconditions

D3DA3xx/x Introduction
ProjectengineeringmanualV1.00
9
©KEBA
1 Introduction
1.1 Purposeofthedocument
ThisdocumentdescribesthestructureoftheaxismoduleD3DA3xx/x.
Information
Thismanualisnotadressedtoendcustomers!Necessarysafetynotesfor
theendcustomerhavetobetakenintothecustomermanualintherespec
tivenationallanguagebythemachinebuildersandsystemproviders.
1.2 Preconditions
Thisdocumentcontainsinformationforpersonswiththefollowingskills:
Targetgroup Prerequisiteknowledgeandabilities
Safetyengineerfor"Func
tionalSafety"
Basictechnicaltraining(technicalcollege,engineertrainingor
correspondingprofessionalexperience).
Knowledgeabout:
● Principlesoffunctionalsafety
● Relevantstandardsandsafetyregulationsforthemachine/
system,particularlyknowledgeaboutvalidationaccording
toENISO13849,
● Specialriskpotentialofthemachine/systemandthepro
ductionprocess
● Specificprotectivemeasurestoavertmachinespecific
hazards(basedonhazardandriskanalysis)
● Functioningandapplicationlimitsofthesafetycomponents
(includingsafetyPLC)
● Indepthknowledgeofnationalaccidentpreventionregula
tions.
Projectengineer
Basictechnicaltraining(technicalcollege,engineertrainingor
correspondingprofessionalexperience).
Knowledgeabout:
● Currentvalidsafetyregulations,
● FundamentalvalidationconceptsaccordingtoENISO
13849,
● MethodofoperationofaPLC,
● theapplication.