EasyManua.ls Logo

Keba D3-DA 3 Series - 13.2.4 Environmental and surrounding conditions; 13.3 CE marking; 13.4 UL certification; 13.5 Loads on the mains due to harmonics

Keba D3-DA 3 Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D3DA3xx/xECdirectivesandstandards
ProjectengineeringmanualV1.00
98
©KEBA
13.2.4 Environmentalandsurroundingconditions
EN618002:1998
Adjustablespeedelectricalpowerdrivesys
temsPart2:Generalrequirements;rating
specificationsforlowvoltageadjustablefre
quencya.c.powerdrivesystems
13.3 CEmarking
TheD3DA3xx/xmeetstherequirementsforinstallationinamachineor
plantinthecontextoftheMachinerydirective2006/42/EGandtheLowvolt
agedirective2006/95/EG.TheD3DA3xx/xisaccordinglyCEmarked.The
D3DA3xx/xaxismodulesinagroupwiththeD3DP3xx/xsupplymodules
andonobservingtheinstallationinstructionsandontheusageofcabelsand
accessoriessuggestedinchapter15.1Accessoriesand15.2Connection
technologymeettherequirementofEMCdirectives2004/108/EG.TheCE
markingonthetypeplateindicatesconformitywiththeabovedirectives.
ForvalidityofCEdeclarationseealsochapter15.3Selectionofmainsfilter
(fornumbermax.allowedaxesandmax.allowedcompletecablelengthfor
allaxes.
13.4 ULcertification
TheULcertificationisinpreparation.
13.5 Loadsonthemainsduetoharmonics
InformationtoEN6100032:2006
ThedevicesintheKeDriveare"professionalequipment"inthecontextof
EN61000suchthatwithanominalconnectedload≤1kW(or≤16Aper
mainsphase)theyfallwithinthescopeofthestandard.Onthedirectcon
nectionofthesupplymodule≤1kWtothepubliclowvoltagegrid,either
measurestoconformwiththestandardaretobetakenortheresponsible
utilitymustgrantapprovalforconnection.Ifyouuseourdrivesasacompo
nentinyourmachine/system,thedirectiveofthestandardsmustbe
checkedfortheentiremachine/system.

Table of Contents

Related product manuals