Keba D3-DA 3 Series - Page 25

D3DA3xx/x Mountingandinstallationinstructions
ProjectengineeringmanualV1.00
25
©KEBA
Mountingandalignment
● Thedevicescanbemounteddirectlybesideeachotherwithoutany
spacing.Theyarefastenedtothemountingplateusingtwo/fourscrew
joints.ThecontrolandsupplyofpowertotheD3DA3xx/xaxismodules
andtheD3DU3xx/xcontrollerisundertakenwiththeaidoftheDClink
and24VDCbusbarsandispossiblewiththesamecoolingconcept,
withoutadditionalcompensationmeasuresinrelationtothedevice
depth.
● Thedevicesmustbemountedinthestipulatedorderoneagainstthe
other.Adifferentorderisnotallowed,asotherwisetherewillbeprob
lemswiththebusbarsandthethermalinteractionbetweenthedevices.
Illustration54:Alignmentsequence
1 ...D3DU3xx/xcontrolmodule 2 ...D3DP3xx/xsupplymodule
3 ...D3DA3xx/xaxismodule 4 ...FurtherD3DA3xx/xaxismodule