Getting Started 1-7
4 Display annunciators
* (asterisk) Readings being stored in buffer.
↔ (more) Indicates additional selections are available.
AUTO Autorange enabled.
BUFFER Recalling readings stored in buffer.
ERR Questionable reading, or invalid cal step.
FAST Fast (0.1 PLC) reading rate selected.
FILT Filter enabled.
LSTN Instrument addressed to listen over GPIB.
MATH mX+b or Percent (%) calculation enabled.
MED Medium (1 PLC) reading rate selected.
REL Relative enabled for present measurement function.
REM Instrument in GPIB remote mode.
SHIFT Accessing a shifted key.
SLOW Slow reading rate selected; 6 PLC for 60Hz or 5 PLC for 50Hz.
SRQ Service request over GPIB.
STAT Displaying buffer statistics.
TALK Instrument addressed to talk over GPIB bus.
TIMER Timer controlled triggering in use.
TRIG External triggering (GPIB or trigger link) selected.
5 Handle
Pull out and rotate to desired position.
To Next Page
Loading...
Need help?
General
