11-30 Triggering 2400 Series SourceMeter
®
User’s Manual
Pulse Mode triggering (Model 2430)
Triggering for the Model 2430 is similar to triggering for the DC Mode. However, in order
to accomplish fast pulse output, triggering is simplified for the Pulse Mode. The following
information covers the triggering differences between the DC Mode and Pulse Mode.
Trigger models
The front panel trigger model for the Pulse Mode is shown in Figure 11-13, while the trig-
ger model for remote operation is shown in Figure 11-14. These trigger models are simpli-
fied versions of their DC Mode counterparts (Figure 11-1 and Figure 11-13).
NOTE The following trigger model information assumes that you are already familiar
with the basic DC Mode trigger model operation presented earlier in this
section.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
