12
Limit Testing
• Types of limits — Discusses the three types of limits: compliance, coarse limits,
and fine limits. Also summarizes the two operating modes: grading and sorting.
• Operation overview — Covers binning control and pass/fail condition for the
grading and sorting modes.
• Binning systems — Details the handler interface, as well as single-element and
multiple-element binning and digital output clear pattern that occurs after a binning
operation.
• Configuring and performing limit tests — Describes how to configure the
SourceMeter for limit testing and summarizes a typical test procedure.
• Remote limit testing — Summarizes limit commands and provides a basic pro-
gramming example.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
