47
4
4
Features of your vehicle Bonnet
Bonnet
The bonnet serves as a cover for the
engine compartment.
Open the bonnet if maintenance
works needs to be performed in the
engine compartment or if you need
to look at the compartment.
Opening the bonnet
1. Pull the release lever to unlatch
the bonnet. The bonnet should
pop open slightly.
Open the bonnet after turning off
the engine on a flat surface, shifting
the shift lever to the P (Park, for
Automatic Transmission/Dual Clutch
Transmission/ Intelligent Variable
Transmission) or first gear or R
(Reverse, for Manual Transaxle) and
set the parking brake.
2. Go to the front of the vehicle,
raise the bonnet slightly, push the
secondary latch (1) up side and lift
the bonnet (2).
3. Pull out the support rod.
4. Hold the bonnet opened with the
support rod(3).
Hot parts
Grasp the support rod in the area
wrapped in rubber. The rubber will
help prevent you from being burned
by hot metal when the engine is hot.
To Next Page
Loading...
