Features of your vehicle
284
Safe Exit Warning (SEW)
Function operation
Function warning
Collision warning when exiting vehi
-
cle
䳜 When an approaching vehicle
from the rear is detected at the
moment a door is opened, the
'Watch out for traffic' warning
message will appear on the clus
-
ter, the warning light will illumi
-
nate on the outside rear view
mirror and an audible warning will
sound.
䳜 Safe Exit Warning will warn the
driver when your vehicle speed is
below 3km/h (2mph), and the
speed of the approaching vehicle
from the rear is above 6 km/h (4
mph).
䳜 For your safety, change the Set
-
tings after parking the vehicle at a
safe location.
䳜 If any other function's warning
message is displayed or audible
warning is generated, Safe Exit
Warning message may not be dis
-
played and audible warning may
not be generated.
䳜 You may not hear the warning
sound of Safe Exit Warning if the
surrounding is noisy.
䳜 Safe Exit Warning does not oper
-
ate in all situations or cannot pre
-
vent all collisions.
䳜 Safe Exit Warning may warn the
driver late or may not warn the
driver depending on the road and
driving conditions. Always check
vehicle surroundings.
䳜 Safe Exit Warning does not oper
-
ate if there is a problem with
Blind-Spot Safety system.
- The warning message of Blind-
Spot Safety system will appear
when:
- The warning message of Blind-
Spot Safety system appears on
the cluster.