119
6
6
Driving your vehicle Manual Speed Limit Assist (MSLA)
Function Operation
Setting the speed limit
1. Press and hold the Driving Assist
button on the steering wheel, at
the desired speed. The Speed
Limit indicator will Illuminate on
the cluster.
2. Push the + switch up or - switch
down, and release it at the
desired speed.
Push the + switch up or - switch
down and hold it. The speed will
increase or decrease to the near
-
est multiple of ten (multiple of
five in mph) at first, and then
increase or decrease by 10 km/h
(5 mph).
3. The set speed limit will be dis
-
played on the cluster. If you would
like to drive over the preset speed
limit, depress the accelerator
pedal beyond the pressure point
to activate the kickdown mecha
-
nism.
The set speed limit will blink and
chime will sound until you return
To Next Page
Loading...
