Maintenance
1048
Light bulbs
Back up lamp (Bulb type) bulb
replacement
4 door
5 door
If the back up lamp (1) does not
operate, have your vehicle checked
by a professional workshop. Kia rec
-
ommends to visit an authorised Kia
dealer/service partner.
License plate lamp (Bulb type) bulb
replacement
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Remove the bulb from bulb-
socket by pulling it out.
4. Insert a new bulb by inserting it
into the bulb-socket.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assem
-
bly and turn the socket clockwise.
6. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
To Next Page
Loading...
