155
6
6
Driving your vehicle Rear Cross-Traffic Collision-Avoidance Assist
(RCCA)
When the vehicle is first delivered,
warning timing is set to Normal. If
you change the Warning Timing, the
warning time of other Driver Assist
functions may change.
Always be aware before changing
the warning timing.
Warning volume
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 䳒Driver assistance →
Warning volume' from the 'Setup →
Vehicle (LCD Display) or Settings →
Vehicle (Infotainment System
screen)' menu to change the Warn
-
ing Volume to 'High', 䳒Medium䳓, 䳒Low䳓
or 䳒Off䳓 for Rear Cross-Traffic Colli
-
sion-Avoidance Assist.
However, when Warning volume is
turned off, the steering wheel
vibration function will turn on if it
was turned off.
If you change the Warning volume,
the Warning volume of other Driver
Assistance functions may change.
䳜 The setting of the Warning timing
and Warning volume applies to all
functions of the Rear Cross-Traf
-
fic Safety system.
䳜 Even though 䳒Normal䳓 is selected
for Warning Timing, if the vehicles
from the left and right side
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 䳒Late䳓 for Warning Timing
when traffic is light and when
driving speed is slow.
If your vehicle is equipped with addi
-
tional Infotainment System, please
scan the QR code in a separately
supplied Car Infotainment System
Quick Reference Guide.
Function operation
Function warning and control
Rear Cross-Traffic Safety system
will warning and control the vehicle
depending on collision level: 'Collision
warning', 'Emergency braking' and
'Stopping vehicle and ending brake
control'.