Kia Cerato 2021 - Function Operation

Driving your vehicle
1006
Lane Keeping Assist (LKA)
To activate/deactivate LKA, with the
ignition switch or ENGINE START/
STOP button in the ON position,
press and hold the Lane Driving
Assist button ( ) located on
the steering wheel to turn off Lane
Keeping Assist. Press and hold the
button again to turn on the function.
The indicator ( ) in the cluster
display will initially illuminate gray. If
you pressing and holding the Lane
Driving Assist button located on the
steering wheel, LKA will be turned
off and the indicator on the cluster
display will go off.
NOTICE
When Lane Keeping Assist is turned
off with the Lane Driving Assist but
-
ton, Lane Safety settings will turn
off.
Warning volume
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver assistance →
Warning volume' from the 'Setup →
Vehicle (LCD Display) or Settings →
Vehicle (Infotainment System
screen)' menu to change the Warn
-
ing Volume to 'High', 䳒Medium䳓, 䳒Low䳓
or 䳒Off䳓 for Lane Keeping
Assist.However, even if 䳒Off䳓 is
selected, the Hands-off Warning
volume will not be turned off. Steer
-
ing wheel vibration function will also
remain on even if 䳒Off䳓 is selected.
If you change the Warning volume,
the Warning volume of other Driver
Assistance functions may be
changed.
NOTICE
If your vehicle is equipped with addi
-
tional Infotainment System, please
scan the QR code in a separately
supplied Car Infotainment System
Quick Reference Guide.
Function operation
Warning and control
Lane Keeping Assist will warn and
control the vehicle with Lane Depar
-
ture Warning and Lane Keeping
Assist.
OBD041619R