Kia Cerato 2021 - Function Settings

85
6
6
Driving your vehicle Forward Collision-Avoidance Assist (FCA)
(Sensor fusion)
䳜 Use only genuine parts to repair
or replace a damaged front radar
cover. Do not apply paint to the
front radar cover.
Function settings
Setting
Forward safety
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver assistance →
Forward safety' from the 'Setup →
Vehicle (LCD Display) or Settings →
Vehicle (Infotainment System
screen)' menu to set whether or not
to use each function.
䳜 If 䳒Active assist䳓 is selected, the
function will warn the driver with
a warning message, an audible
warning and steering wheel vibra
-
tion depending on the collision risk
levels.
䳜 If 䳒Warning only䳓 is selected, the
function will warn the driver with
a warning message, an audible
warning and steering wheel vibra
-
tion depending on the collision risk
levels. Braking and steering (if
equipped) will not be assisted. The
driver must apply the brake pedal
or steer the vehicle if necessary.
䳜 If 䳒Off䳓 is selected, the function will
off. The warning light will
illuminate on the cluster.
The driver can monitor Forward Col
-
lision-Avoidance Assist ON/OFF sta
-
tus from the settings menu. If the
warning light remains ON when
the function is ON, have the function
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
WARNING
䳜 When the engine is restarted,
Forward Collision-Avoidance
Assist will always turn on.
䳜 If 'Off' is selected from the set
-
tings menu, the Forward Collision
Assist will not operate so the
driver should always be aware of
the surroundings and drive safely.
OMQ4AH050344R