93
8
8
Maintenance Light bulbs
4. Stop lamp (LED type)
5. Tail lamp (LED type)
6. Rear fog lamp (LED type)
7. Rear turn signal lamp (Bulb type)
8. Back Up lamp (Bulb type)
9. License plate lamp (Bulb type)
10.High mounted stop lamp (Bulb or
LED type)
Light bulb position (Side)
Side repeater lamp 䳍 Type A
Side repeater lamp 䳍 Type B
1. Side repeater lamp (LED type)
2. Side repeater lamp (Bulb type)
Headlamp (High/Low) (Bulb type)
bulb replacement - Headlamp Type
A
1. Open the bonnet.
2. Remove the headlamp bulb cover
by turning it counterclockwise.
3. Disconnect the headlamp bulb
socket-connector.
4. Remove the bulb-socket from the
headlamp assembly by turning
the bulb-socket counterclockwise
until the tabs on the bulb-socket
align with the slots on the head
-
lamp assembly.
5. Install a new bulb-socket assem
-
bly in the headlamp assembly by
aligning the tabs on the bulb-
socket with the slots in the head
-
lamp assembly. Push the bulb-
socket into the headlamp assem
-
bly and turn the bulb-socket
clockwise.
6. Connect the headlamp bulb
socket-connector.
7. Install the headlamp bulb cover by
turning it clockwise.
To Next Page
Loading...
