Features of your vehicle
1304
Lighting
Type B
To turn the rear fog lights on, turn
the rear fog light switch (1) to the
on position when the headlight is
turned on.
Also, the rear fog lights turn on
when the rear fog light switch is
turned on after the front fog light
switch (if equipped) is turned on and
the headlight switch is in the
parklight position.
To turn the rear fog lights off:
䳜 Turn the rear fog light switch to
the on position again.
High Beam Assist (HBA) (if
equipped)
High Beam Assist is a function that
automatically adjusts the headlamp
range (switches between high beam
and low beam) according to the
brightness of other vehicles and
road conditions.
Type A
Type B
Function settings
The driver can activate HBA by plac
-
ing the ignition switch or ENGINE
START/STOP button to the ON posi
-
tion and by selecting: 'User Settings
→ Lights → HBA (High Beam Assist)'.
If you disable this setting, HBA will
not work.
The setting of HBA will be main
-
tained, as selected, when the engine
is re-started.
To Next Page
Loading...
