115
4
4
Features of your vehicle Reverse Parking Distance Warning (PDW)
- Installing the license plate dif
-
ferently from the original loca
-
tion
- The vehicle bumper height or
sensor installation has been
modified.
- Any non-factory equipment or
accessories have been installed.
䳜 The function will operate normally
when such foreign matters are
removed.
䳜 The following objects may not be
detected:
- Sharp or slim objects, such as
ropes, chains or small poles
- Objects, which tend to absorb
sensor frequency, such as
clothes, spongy material or
snow
- Objects smaller than 100 m (40
in) in length and narrower than
14 cm (6 in) in diameter
- People, animal or objects
located very close to the sen
-
sor.
䳜 The indicator may operate differ
-
ently when the people, animal or
obstacle is located between sen
-
sors.
䳜 Parking Distance Warning may
not occur sequentially depending
on vehicle speed or obstacle
shape.
䳜 Have the function be checked by
an authorised Kia dealer/service
partner.
Function settings
Warning volume
With the ignition switch or the
ENGINE START/STOP button in the
ON position, select 'Driver assistance
→ Warning volume' from the Set
-
tings menu to change the warning
volume to 'High', 䳒Medium䳓 or 䳒Low䳓 for
Reverse Parking Distance Warning.
If you change the warning volume,
the warning volume of other Driver
Assistance functions may change.
Function operation
Operating conditions
䳜 Reverse Parking Distance Warning
activates when the gear is R
(Reverse) position.
䳜 Reverse Parking Distance Warning
assists the driver during reverse
movement of the vehicle by chim
-
ing if any people, animal, or object
is sensed when the vehicle speed
is below 10km/h (6mph).
䳜 When an obstacle is detected, it is
displayed on the cluster and info
-
tainment function screen.
䳜 When more than two objects are
detected at the same time, the
closest one will be alerted with an
audible warning.
Types of warning sound and indica
-
tor
To Next Page
Loading...
